FAQs
Emergency plumber cost and other questions, answered.
Emergency plumber cost, burst pipes, stopcocks, ceiling leaks, overflowing toilets and no water. Search for your problem. If water is escaping, ring first.
07564 495989Questions, answered
Emergency plumber cost and the other questions people ask.
Water where it shouldn't be? Ring us.
What counts as a plumbing emergency?
Water you cannot stop, water near electrics or coming through a ceiling, sewage coming back up, no water at all, or your only toilet out of use. If in doubt, ring.
What do I do if a pipe bursts?
Turn off the stopcock, switch off electrics near the water at the consumer unit if it is dry and safe to reach, catch the water and ring us.
Where is my stopcock?
Usually under the kitchen sink. If not, try a utility room, downstairs toilet, under the stairs, the garage or a cellar.
Can I use electrics if water is leaking near them?
No. Do not touch switches, sockets or appliances near the water. Turn that circuit off at the consumer unit only if the unit is dry and you can reach it safely.
Which areas do you cover?
In Nottinghamshire: Nottingham, Mansfield, Beeston, West Bridgford, Arnold, Hucknall, Sutton-in-Ashfield, Kirkby-in-Ashfield, Eastwood. In Derbyshire: Derby, Chesterfield, Belper, Ripley, Alfreton, Heanor, Ilkeston, Matlock, Duffield, Ashbourne, Long Eaton, Swadlincote. Somewhere in between? Ring with your full postcode.
What does an emergency plumber cost?
We tell you how the visit and the repair are priced before any work starts. Access, the fault and the parts all affect the total, so we price the job rather than publish a list.
Should I ring or use the form?
If water is escaping or a toilet is out of use, ring. It is the quickest way to reach us. The form and WhatsApp are for jobs that can wait a little.
Can I send a photograph?
Yes, on WhatsApp or through the help form. A wide view and a close-up of the fitting are the most useful. Only take photos from a safe spot.
Do you work on gas boilers?
No. Gas appliance work needs a gas engineer. We handle the water side of your plumbing: pipes, leaks, taps, toilets and blockages.
Will turning off the stop tap stop every leak?
Not always. It stops incoming mains water when it is working, but stored water or water already in pipework may continue to escape. Heating systems can also have different isolation arrangements. Tell us what happened after you closed the tap and avoid changing unidentified valves.
Is a ceiling stain always a plumbing leak?
No. Water from plumbing is one possibility, but roof water, seals and condensation can also be involved. The room above, recent weather and when water is being used all help us pin it down.
What should I do if water is coming through my ceiling?
Turn off the water at the stopcock, switch off the lights in that room at the consumer unit if it is safe to reach, put a bucket under the drip and keep people out from under the ceiling. Then ring us.
Should I keep flushing to clear a blockage?
No. If water is rising or not draining away, another flush can make the toilet overflow. Leave the fitting out of use and explain the water level when you call. Do not add a bucket of water to a pan that is already holding water.
What do I do if my toilet is overflowing?
Stop flushing. Close the isolation valve on the cistern feed or lift the float to stop it filling. Put towels down, keep children and pets away from the water, and ring us.
Can I keep using the dishwasher with a blocked sink?
Not if it empties through the affected waste or makes the sink fill. Stop adding wastewater to a route that cannot clear it. Tell us how the appliances are connected if you know, but do not move a heavy appliance or reach into a wet area to find out.
Who is responsible for clearing a blocked drain?
It depends on which pipe is blocked and whether it serves one property or is part of the shared network. Severn Trent provides guidance on private drains and public sewers. If responsibility is unclear, ask the water company to help establish it before authorising private work.
Why have I got no water in my house?
If the street is off too, it is the water company. If it is just you, check the stopcock is fully open and look for a leak or a frozen pipe. Then ring us.
Does no hot water always mean the boiler has failed?
No. A problem may affect one fitting, the supply or the wider hot-water system. The symptoms alone do not identify the cause. If it is the boiler, you need a gas engineer. Tell us which taps are affected and we will tell you what it needs.
Where is the internal stop tap usually found?
It is often beneath a kitchen sink or close to where the water enters the property. It may also be in a cupboard, utility space, garage or cellar. The exact location varies, especially where a property has been altered, so do not rely on a single expected position.
Why does the toilet keep running after a flush?
A filling or sealing component may not be working as intended, but the exact cause needs checking. Note whether water is visible in the pan and whether the filling noise stops. Avoid repeatedly adjusting unfamiliar internal parts or leaving a persistent leak unreported.
Does every dripping tap just need a washer?
No. Tap mechanisms differ, and many use cartridges or other components. The body, seals and connections can also be involved. Identify the fitting and describe the leak before choosing parts. A generic component bought on appearance may not fit or solve the fault.
Why is my shower leaking when it is turned off?
Usually a worn cartridge or washer inside the shower valve, so water gets past it even when the handle is off. It needs the valve repairing or the cartridge replacing. Isolate the shower if it has a valve, and ring us.
How do I stop an outside tap leaking?
Turn off the isolation valve on the pipe that feeds it, usually under the kitchen sink or in a utility room. If there is no valve, turn off the stopcock. A drip from the spout is usually a washer; a leak from the body or pipe is usually frost damage and needs the tap or pipe replacing.
Will turning off the main water stop tap stop a radiator leak?
Not necessarily. A heating circuit can contain water separately from the incoming mains supply. Avoid turning unidentified valves in an attempt to isolate it. Explain the leak and what controls have already been used so the arrangement can be assessed.
How can I tell if a pipe is frozen?
A loss of flow during freezing conditions, particularly at an exposed outlet, can be a sign. It is not a diagnosis. Check what you already know about other taps and any local supply interruption, then describe the pattern without dismantling pipework or forcing a valve.
Can a tenant contact you directly?
A tenant can call us about a problem, and should also report it to the landlord or agent. We confirm who is authorising the visit and paying for the work. Where there is an immediate safety risk, use the appropriate emergency route first.
How do I unblock a toilet?
Stop flushing first. Wearing gloves, use a cup plunger with a good seal over the outlet and work it firmly for a minute. If the level does not drop, or water is coming up elsewhere in the house, stop and call us, as the blockage is further down the pipe.
How do I unblock a sink?
Stop running water into it. Clear what you can see from the plughole, then try a sink plunger with the overflow covered by a damp cloth. Do not mix chemical cleaners, and do not use them if you plan to call a plumber. If it will not move, call us.
Why is there no hot water when the heating works?
If the radiators are warm but the taps run cold, the fault is usually in how hot water is sent to the taps rather than in the heat source itself. A diverter or zone valve, a timer setting or a cylinder control are common culprits. Tell us what type of system you have when you call.
Why is my radiator leaking?
Most radiator leaks come from the valve or its connection, where the gland or a fitting has worn or loosened. A leak from the radiator body itself usually means internal corrosion. Wipe it dry and watch where the water reappears, then tell us when you call.
How do I thaw frozen pipes safely?
Open the tap the pipe feeds so water can escape as it thaws. Warm the pipe gently with towels soaked in warm water or a hairdryer on low, starting nearest the tap. Never use a flame or boiling water, and watch for leaks as it thaws.
How much does an emergency plumber cost?
It depends on the time of day, the fault and the parts needed, so we do not publish a single price. Ring and we will tell you how the visit and the repair are priced before we set off.
What should I do if a pipe bursts?
Turn off the internal stopcock if you can reach it safely, open the cold taps to drain the system, and switch off electrics at the consumer unit if water is near sockets or wiring and the unit is dry and safe to reach. Then ring us.
No matching question. Try a shorter phrase or call us.
Find the right help
Every emergency plumber job we deal with.
A clear next step
Plumbing emergency?
Ring us now.
Tell us your postcode and what is happening.