Water leak or burst pipe? Call 07564 495989
Burst pipes in Nottinghamshire and Derbyshire, example photographExample
Water escaping from pipework

Burst water pipe? Emergency repair in Nottinghamshire and Derbyshire

Pipe burst? Turn off your stopcock if you can reach it safely, switch off electrics near the water, then ring 07564 495989.

07564 495989
Across Nottinghamshire and DerbyshirePhotos welcome
STEP 1 OF 2

Tell us what
has happened.

Water still escaping? Ring first. Otherwise, tell us here.

What is the problem?
Right now

Pipe burst? Do this now.

  1. 01

    Close the internal stop tap

    Only do this if the valve is known, accessible and safe to reach. Turn it gently and stop if it is seized. Do not use tools to force it.

  2. 02

    Avoid electrical and ceiling hazards

    Stay out of water near sockets, wiring or appliances. Do not stand under a sagging ceiling or puncture it yourself. Keep children and pets away from the affected space.

  3. 03

    Limit damage without taking risks

    Where the water and surroundings are safe, use a container or towels and move light belongings. Note when the leak began and whether the flow changed after isolation.

  4. 04

    Ring us

    Postcode and what you can see.

    Call 07564 495989

Keep people away from wet electrics, dirty water and sagging ceilings. If anyone is in danger, call 999.

Understand the problem

A burst needs isolation before a repair decision

A burst pipe can release water quickly, including behind a cupboard, under a floor or above a ceiling. Keep away from wet electrics and damaged ceilings.

A burst is a split, break or failed connection that allows water out of pipework. Sometimes the source is obvious; sometimes the first sign is a spreading ceiling patch or water coming through a floor. Pressure, frost, corrosion, accidental damage and movement are the usual causes, and we find which one it is. A damaged pipe should not be treated as repaired simply because its visible leak has slowed.

First we work out which pipe has failed and how to isolate it. Cold water, stored water and heating circuits do not all behave in the same way. Water can continue to escape after the main stop tap is closed because some remains elsewhere in the system. Tell us what you have turned off, rather than trying unfamiliar valves until the flow changes.

The location also affects the work. An exposed connection in a kitchen cupboard is very different from a pipe behind tiling or under a finished floor. We open up only what is needed to see the full extent of the failure. Tell us what you can see on the phone. Once we have found the fault, we explain the repair and any making good before we start. Keep the damaged area clear without disturbing unstable surfaces.

Burst pipes detail, example photographExample

A split pipe or joint is spraying, running or pooling water.

Water is appearing through a ceiling, floor or wall.

A frozen pipe starts leaking as temperatures rise.

Water where it shouldn't be?

Ring us. A postcode and what you can see is enough.

Call 07564 495989
From the first call

A clear route
through the problem.

You know what is happening, what is agreed and what comes next.

01

Locate the visible escape

Describe where the water first appeared and whether the pipe itself is visible. We ask about the supply, the extent of the leak and any steps already taken.

02

Plan safe access

We agree cupboard, floor and ceiling access with you, and who signs off any opening up. The aim is to find the fault without assuming that the damp patch marks its exact location.

03

Agree the repair scope

A repair may involve a connection, a section of pipe or another failed component. We check the pipe, the materials and the isolation, then agree the method with you.

04

Check and explain next steps

We test the repair with the water back on. Drying out, making good and electrical checks are separate jobs, and we note anything that needs doing.

Choose how to get in touch

Water still escaping?
Pick up the phone.

07564 495989
Which one is you?

Pick the closest match.

Active escape of water

Call and say that water is still flowing. Give your postcode and explain whether the main stop tap is closed, open, inaccessible or not working.

Leak stopped after isolation

Tell us what has been isolated and which facilities are no longer usable. Leave the affected section isolated until we have repaired and tested it.

Damage needing a written record

Say if the property is rented or an insurer is involved. Keep your photographs and tell us what details your landlord or insurer needs.

When you ring

What happens
when you ring.

07564 495989

Tell us what you can see

No jargon. Where the water is, what has stopped working, your postcode.

We help you make it safe

Where your stopcock is, what to switch off, what to leave alone.

Send a photo if it helps

A quick picture on WhatsApp shows us the fitting before we arrive.

You know the plan

What we will do and how it is priced, before any work starts.

Still dripping?

One call. Straight answers.

07564 495989
Questions, answered

Burst pipes questions.

Water where it shouldn't be? Ring us.

Call 07564 495989
Will turning off the stop tap stop every leak?
Not always. It stops incoming mains water when it is working, but stored water or water already in pipework may continue to escape. Heating systems can also have different isolation arrangements. Tell us what happened after you closed the tap and avoid changing unidentified valves.
Should I open a ceiling to find the burst?
Do not cut, drill or puncture a wet ceiling yourself. There may be wiring, concealed pipework or loose material above it. Keep clear of any bulge or sagging area. Describe the affected room and the size of the visible patch when you call.
Can a burst pipe be repaired without replacing all the pipework?
Often, yes. It comes down to the material, the location and the condition around the failure. Where the surrounding pipe is sound we repair the section that failed.
Can I turn the water back on once it stops dripping?
A drip stopping after isolation does not mean the pipe has repaired itself. Turning the supply back on may restart the escape. Keep the affected supply isolated until the fault and any repair have been assessed. We will tell you how to keep essential facilities going in the meantime.
What affects the cost of burst pipe work?
The main factors include locating the failure, gaining access, safely isolating the supply, the pipe material, replacement parts and checking the repair. Drying and restoring a wall, floor or ceiling may be separate. We explain the scope and the price before you approve any work.
What photographs are useful?
A safe wide view of the area and a closer view of any exposed pipe or connection can help. Include context such as a cupboard or floor edge. Do not move an electrical appliance, enter standing water or climb into a damaged ceiling space to take pictures.
What should I do if a pipe bursts?
Turn off the internal stopcock if you can reach it safely, open the cold taps to drain the system, and switch off electrics at the consumer unit if water is near sockets or wiring and the unit is dry and safe to reach. Then ring us.
Where is my stopcock?
Usually under the kitchen sink. If not, try a utility room, downstairs toilet, under the stairs, the garage or a cellar.
A clear next step

Plumbing emergency?
Ring us now.

Tell us your postcode and what is happening.

07564 495989
Call nowWhatsApp
STEP 1 OF 2

Tell us what
has happened.

Water still escaping? Ring first. Otherwise, tell us here.

What is the problem?
Plumbing photograph